Search Results

The agricultural sector is responsible for a large share of anthropogenic greenhouse gases. At the same time, methods such as targeted land use change can reduce emissions from landscape elements and sequester carbon from the atmosphere in the soil. This process, also known as carbon farming, has not been uniformly defined, and faces challenges regarding establishing new requirments for agricultural vehicles and technology, creating profitable business models (that preclude “greenwashing”), and developing governmental frameworks and industry acceptance. Carbon Farming and Its Impact on Agricultural Technology discusses the large development gap for carbon farming methods, especially with regard to agricultural technology. In addition to the new hardware requirements arising from land use change, there is also a need for the further development of software.

This SAE Recommended Practice specifies the requirements for application of SAE J1939 in agricultural and forestry equipment. This document specifies the series of documents within the set of SAE J1939 documents that are applicable to agricultural and forestry equipment and provides further requirements for this industry. The SAE and ISO groups have cooperated to define agricultural and forestry networks in a manner to allow compatibility of ECUs and messaging protocols between agricultural and forestry ISO 11783 networks and truck and bus SAE J1939 networks.

The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.

The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14.

Electrification is a very current topic for all the mobile machinery whose primary source of power is an internal combustion engine; among those the light weight passenger vehicles represent the first field of application of this trend and also the state of the art of the technology. Agriculture is a huge fuel consumer sector and for this reason the tractor industry is now working on electrification, proposing different approaches for different power sizes: the “Battery Electric Vehicle” topology is proposed for small and mid-power size tractors, while for the big ones various hybrid architectures couple the internal combustion engine to electric units. In this paper a reference tractor is considered, endowed with an input coupled hydro-mechanical Continuously Variable Transmission and an alternative compound architecture is proposed, which provides the same performances and it is more suitable for electrification.

The requirements for modern drivetrains are increasing across all industries. Even mobile working machines such as agricultural and construction machinery are subject to increasingly higher demands in terms of efficiency and CO2 emissions. To verify these requirements and drive further development, it is necessary for testing processes to comprehensively evaluate the machine and its operational processes. For this purpose, the MOBiL testing approach was developed at the Institute of Mobile Machines. This approach incorporates parallel drivetrains, information flow and the environment of the driving and working task. To implement this approach in a complete vehicle testbench, a framework was developed that enables fully individual driving and working tasks of a mobile working machine to be replicated on a test bench. The basis for this framework is the Robot Operating System (ROS), which runs various nodes.

Non-Road Mobile Machinery (NRMM) incorporates a wide variety of machines not intended for the transport of passengers or goods on the road. This includes small gardening equipment, construction, mining, agricultural, and forestry machinery up to locomotives and inland waterway vessels, mostly using an internal combustion engine. NRMM was often overlooked and neglected in the past when considering pollutant and greenhouse gas emissions. Due to their high diversity, they are hard to categorize, resulting in a lack of available data. As emissions from road transport are being tackled by regulations, the emissions of NRMM become an increasing part of total transport emissions. An alternative to fossil fuels will be required for the energy supply of NRMM to fully commit to the CO2 reduction goals, and to fulfil the future requirements of legislators and public opinion.

Quasicrystalline (QC) coatings were evaluated as leading-edge protection materials for rotor craft blades. The QC coatings were deposited using high velocity oxy-fuel thermal spray and predominantly Al-based compositions. Ice adhesion, interfacial toughness with ice, wettability, topography, and durability were assessed. QC-coated sand-blasted carbon steel exhibited better performance in terms of low surface roughness (Sa ~ 0.2 μm), liquid repellency (water contact angles: θadv ~85°, θrec ~23°), and better substrate adhesion compared to stainless steel substrates. To enhance coating performance, QC-coated sand-blasted carbon steel was further exposed to grinding and polishing, followed by measuring surface roughness, wettability, and ice adhesion strength. This reduced the surface roughness of the QC coating by 75%, resulting in lower ice adhesion strengths similar to previously reported values (~400 kPa).

Drop-in replacement biofuels and electrofuels can provide net-zero CO2 emissions with dramatic reductions in contrail formation. Biofuels must transition to second-generation cellulosic feedstocks while improving land and soil management. Electrofuels, or "e-fuels,” require aggressive cost reduction in hydrogen production, carbon capture, and fuel synthesis. Hydrogen has great potential for energy efficiency, cost reduction, and emissions reduction; however, its low density (even in liquid form) combined with it’s extremely low boiling temperature mean that bulky spherical tanks will consume considerable fuselage volume. Still, emerging direct-kerosene fuel cells may ultimately provide a superior zero-emission, energy-dense solution. Decarbonized Power Options for Civil Aviation discusses the current challenges with these power options and explores the economic incentives and levers vital to decarbonization.

Volvo Trucks enters electrification's next phase With electric trucks already available, the OEM focuses on refining service and maintenance, expanding EV-certified dealerships and scaling production. Why agriculture will automate before on-highway Danfoss' top autonomy executive says automation will help overcome labor and technological challenges that would otherwise leave billions of dollars' worth of crops rotting in fields. Driver-in-the-loop for off-highway development Industrial and agricultural vehicle engineers can draw many of the same benefits from a driving simulator as passenger-car development teams.

SAE J1939-31 network layer describes the requirements and services for network interconnection ECUs (NIECU) that enable electronic control units (ECUs) on an SAE J1939 network segment to intercommunicate with other ECUs on different network segments of the vehicle or system network. This document defines various types of NIECUs. The information in this document applies only to ECUs that are intended to provide networking services. It is not necessary for an ECU to provide any of these services in order to be compliant with the SAE J1939 protocol.

This SAE Recommended Practice includes wheel mounting elements subject to standardization in a series of industrial and agricultural disc wheels. The disc may be reversible or nonreversible and concave or convex. (See Figure 1 and Table 1.)

This top-level document provides a general overview of the SAE J1939 network and describes the subordinate document structure. This document includes definitions of terms and abbreviations which are used among the various SAE J1939 subordinate documents.

The Tractors are inevitable in the world due to its remarkable contribution majorly in farming process and other applications. the farming equipment needs to perform multiple applications to enhance the productivity and increased horsepower demands all-wheel drive (Refer fig. 1) or four-wheel drive option in the tractor. So, it is becoming a mandatory feature. The main objective of this study is, improving the torsional fatigue life in front axle spindle shaft by modifying the spline design and optimizing induction hardening heat treatment process in such a way that the other part of the system will have a minor or no design change. It helps us to reduce the part count variability, lower manufacturing cost and development time.

A typical cab used on agriculture machines is made up of a metal frame structure with large enclosing panels of glass, plastic, and metal. Acoustic treatments such as coatings, textiles and foams are used within the cab for aesthetics but also to mediate undesired noise. To develop effective designs for the cab to combat noise, accurate tools for measurement, and predictive methods for sound transmission loss are needed. This paper focuses on Sound Transmission Loss (STL) of the rear upper panel of a cab used in agriculture machines. Results from CAE based tools such as Statistical Energy Analysis (SEA), Finite Element Analysis (FEA) and Hybrid FE-SEA methods are compared to measurements. The panel studied included features such as curvature, deep drawn beads with a glass window and a damping coating. The simulation results are refined by incorporating methods for accurate modeling of ribs stiffness, curvature effect and radiation efficiency by synthetic modal approach.